In short
We can install sliding, hinged and high-speed cold store doors in Washington and across Tyne and Wear, coordinating with your refrigeration engineer so the room is back at its working temperature quickly after the change.
- Town
- Washington
- Postcode district
- NE38
- Area
- Tyne and Wear
- Survey
- Free for new installations
What to specify
- Hygienic finishes. Plastisol-coated steel, stainless steel or GRP for food and pharmaceutical use.
- Tight seals. The leaf pulls in against its gaskets on closing so cold air stays where it belongs.
- Pressure relief. Relief valves to balance pressure after the door closes or during defrost.
- Electric sliding. Motorised sliding doors with pull cords, radar or loops and safety edges.
- Heated frames. Freezer frames and thresholds are kept just warm enough that ice cannot form on the seals.
Jobs we can carry out
- Fitting a hinged chiller door with a stainless steel finish to a walk-in cold room in a commercial kitchen.
- Renewing worn gaskets and the frame heater on a chiller door that no longer seals properly.
- Adding a heated pressure relief valve to a freezer room where suction makes the door hard to open once it closes.
Safety law for industrial doors in England
Industrial doors in Washington are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Access, phasing and timing
Sites in and around Washington vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Budgeting for cold store and freezer doors in Washington
| Item | Guide price (ex VAT) |
|---|---|
| Cold store / freezer door (sliding) | £6,495 – £17,995 |
| High-speed fabric door | £7,495 – £15,995 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Cold store and freezer doors in Washington: your questions
Can our cold store door in Washington be made electric?
Often, yes, if the leaf and track are sound, or with a new electric sliding door. Powered cold store doors need safety edges and photocells and a drive suited to the temperature.
What safety release do cold store doors in Washington need?
Every cold store door should open from inside without a key or tool, even when locked from outside. We fit a clearly marked inside release and can add an alarm button connected to a monitored panel.
Why is our cold room door in Washington hard to open after it closes?
Usually negative pressure: air inside cools and contracts once the door seals. A correctly sized pressure relief valve, heated on freezers, solves this. We check for one on survey and can fit it with a new door.
Cold store and freezer doors near Washington
Working in Washington? We also take on jobs in Chester-le-Street, Houghton-le-Spring, Hebburn and across Tyne and Wear.
- Cold store and freezer doors in Chester-le-Street
- Cold store and freezer doors in Houghton-le-Spring
- Cold store and freezer doors in Hebburn
- Cold store and freezer doors in Sunderland
- Cold store and freezer doors in Gateshead
- Cold store and freezer doors in Jarrow
Other services in Washington
- Industrial door repairs
- Bollards and door protection
- Hangar and large-span doors
- Dock shelters and seals
- Impact traffic doors
- Industrial roller shutters
- PVC strip curtains
- Fire shutters
More about Cold store and freezer doors · industrial doors in Washington. Last updated 19 October 2026.
