Dock levellers in Newton Abbot

Quick answer

Replacing a worn or damaged dock leveller in Newton Abbot? We remove the old unit, check and repair the pit, then install and commission a new hydraulic leveller with toe guards, velocity fuse and controls.

Town: Newton Abbot
Postcode district: TQ12
Area: Devon
Survey: Free for new installations

What we fit in Newton Abbot

Sized to your fleet. Platform length and capacity chosen for your vehicles and forklifts.
Telescopic lips. A sliding lip that reaches further and lands exactly where the driver needs it.
Swing-lip levellers. Hinged lips that flip out and land on the trailer bed, suited to most loading bays.
Pit work. We sort the pit too, from re-edging an old one to detailing a new one.
Commissioning. Each leveller tested and handed over with records and instructions.

Typical scopes of work

Fitting an edge-of-dock leveller to a lightly used bay where a full leveller pit is not needed.
Replacing a mechanical leveller with a hydraulic unit that has single-button automatic operation and a velocity fuse.
Sizing a longer leveller platform for a bay that receives both low-bed vans and high-bed articulated trailers.

What the law expects at a loading bay

Across Great Britain, including Newton Abbot, loading bays bring together several duties: maintained work equipment under PUWER 1998, safe traffic routes under the Workplace Regulations 1992, and safe powered doors under the Supply of Machinery (Safety) Regulations 2008. Dock levellers should meet BS EN 1398, and the site's risk assessment should cover vehicle creep and drive-aways.

Keeping your site running during the work

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Budgeting for dock levellers in Newton Abbot

Dock levellers guide prices
Item	Guide price (ex VAT)
Dock leveller, hydraulic swing-lip, into prepared pit	£6,495 – £10,995
Dock leveller, telescopic lip	£8,495 – £13,995

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Dock levellers in Newton Abbot: your questions

How long does it take to fit a dock leveller in Newton Abbot?

A single leveller into a prepared pit is typically fitted and commissioned in a day. Pit repairs or modifications can add time, and we plan work around your loading schedule, bay by bay.

Do you install levellers on new-build sites around Newton Abbot?

Yes. We provide pit details to your groundworks contractor early, supply box-frame or pit-fitted levellers and install them to the main contractor's programme, along with doors and shelters if needed.

Can our dock leveller in Newton Abbot be interlocked with the door?

Yes. We fit interlocks so the leveller only operates with the door fully open, and the door cannot close while the leveller is deployed. It suits both new and existing bays, subject to the controls on each.

Dock levellers near Newton Abbot

Working in Newton Abbot? We also take on jobs in Torquay, Paignton, Exmouth and across Devon.

Other services in Newton Abbot

More about Dock levellers · industrial doors in Newton Abbot. Last updated 19 October 2026.