Insulated roller shutter doors in Newton Abbot

The short version

Insulated roller doors suit premises in Newton Abbot that need better thermal performance without giving up roof space. We supply, fit and commission them, and can service them afterwards on a schedule.

Town: Newton Abbot
Postcode district: TQ12
Area: Devon
Survey: Free for new installations

What we fit in Newton Abbot

Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.
Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
Weather seals. Seals along the guides, head and bottom rail stop wind-driven rain and cold air getting in.
Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
Safety devices. Every powered door gets the safety functions its risk assessment calls for and is tested before handover.

Examples of work we can quote for

Installing an insulated roller door with induction loop activation on a busy internal forklift route.
Supplying insulated roller doors in one matching RAL colour across a terrace of refurbished small business units.
Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.

Who is responsible for door safety at a site in Newton Abbot?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for insulated roller shutter doors

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Newton Abbot

Can you replace our old roller shutter in Newton Abbot with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

How much does an insulated roller shutter door cost in Newton Abbot?

Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Newton Abbot opening free of charge and then put a fixed price in writing.

Does a powered insulated roller door in Newton Abbot need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Insulated roller shutter doors near Newton Abbot

Newton Abbot is in the TQ12 postcode district in Devon. We also cover Torquay, Paignton, Exmouth.

Other services in Newton Abbot

More about Insulated roller shutter doors · industrial doors in Newton Abbot. Last updated 19 October 2026.