At a glance
If your unit in Exmouth loses heat through an old single-skin shutter, an insulated roller door is often the simplest fix. You get a free survey, a written fixed price and full commissioning on completion.
- Town
- Exmouth
- Postcode district
- EX8
- Area
- Devon
- Survey
- Free for new installations
What we fit in Exmouth
- Electric drive. Tubular or external geared motors with a manual override for power cuts.
- Colour choice. Powder-coated RAL finishes to match cladding and building trims.
- Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
- Compact coil. The curtain coils above the opening, leaving ceilings free for lights and sprinklers.
- Controls. From a simple button station to loops and radar, the controls match how often the door opens.
Jobs we can carry out
- Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
- Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
- Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.
Who is responsible for door safety at a site in Exmouth?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Keeping your site running during the work
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Budgeting for insulated roller shutter doors in Exmouth
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
How long does insulated roller door installation take in Exmouth?
Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.
Can you replace our old roller shutter in Exmouth with an insulated one?
Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.
Will an insulated roller door cut heating bills at our Exmouth premises?
It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.
Insulated roller shutter doors near Exmouth
Besides Exmouth, we can survey and quote for sites in Exeter, Newton Abbot, Torquay and the rest of Devon.
- Insulated roller shutter doors in Exeter
- Insulated roller shutter doors in Newton Abbot
- Insulated roller shutter doors in Torquay
- Insulated roller shutter doors in Paignton
- Insulated roller shutter doors in Tiverton
- Insulated roller shutter doors in Taunton
Other services in Exmouth
- Cold store and freezer doors
- Dock levellers
- Door automation and controls
- Sectional overhead doors
- Planned maintenance contracts
- Door safety upgrades
- Fire shutters
- Impact traffic doors
More about Insulated roller shutter doors · industrial doors in Exmouth. Last updated 19 October 2026.