Door automation and controls in Witney

At a glance

Busy door at your Witney (OX28) site? Inverter control, induction loops or radar can open it as traffic arrives and close it straight after, with photocells and safety edges watching the opening.

Town: Witney
Postcode district: OX28
Area: Oxfordshire
Survey: Free for new installations

What we fit in Witney

Matched motors. The motor type and size are chosen for the door's weight, space and cycle count.
Manual override. A manual means of opening is always kept, so the door is never stuck shut without power.
Inverter drives. Soft start and stop with faster opening for high-cycle doors.
Activation options. Choose how the door is opened, from staff buttons to automatic vehicle detection.
Manual-to-electric. Conversions for sectional, roller and sliding doors in good order.

Typical scopes of work

Replacing an obsolete control panel with a modern unit, then re-testing the safety devices and closing forces.
Fitting induction loops and an inverter control panel so forklifts can open a busy internal door without stopping.
Fitting a centre-mounted motor to a roller shutter where a side wall leaves no room at the barrel end.

Powered door rules that apply in Witney

Witney is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for door automation and controls in Witney

Door automation and controls guide prices
Item	Guide price (ex VAT)
Manual-to-electric conversion	£1,195 – £3,195
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Door automation and controls in Witney: your questions

Do you take responsibility for the conformity paperwork in Witney?

Yes. When we convert a door to power, we carry out the risk assessment, test the door and issue the Declaration of Conformity and user instructions, as the person who has made it a machine.

Which activation would suit our Witney site?

It depends on who uses the door. Buttons suit staff, remotes suit drivers, pull cords and loops suit forklifts, and radar suits mixed traffic. We look at your traffic on survey and recommend a set-up.

Can our door in Witney be automated?

If the door is in good mechanical order and a suitable motor is available, usually yes. We check balance, springs, cables, guides and the curtain or panels on survey, and recommend repair or replacement first if needed.

Door automation and controls near Witney

Besides Witney, we can survey and quote for sites in Oxford, Abingdon, Didcot and the rest of Oxfordshire.

Other services in Witney

More about Door automation and controls · industrial doors in Witney. Last updated 19 October 2026.