At a glance
From a simple push-button station to airlock interlocks and traffic lights, we design and fit door controls in Perth and Kinross that make each door safer and quicker to use day to day.
- Area
- Perth and Kinross
- Nation
- Scotland
- Main town
- Perth
- Survey
- Free for new installations
Options for door automation and controls in Perth and Kinross
- Safety devices. Every automated door gets the detection its risk assessment needs, tested before use.
- Matched motors. Direct, centre-mounted, chain-drive or tubular motors sized to the door.
- Activation options. Buttons, key switches, remotes, pull cords, loops, radar and access control.
- Manual-to-electric. Conversions for sectional, roller and sliding doors in good order.
- Inverter drives. Frequency inverters move busy doors faster while cutting wear on every cycle.
Typical scopes of work
- Fitting a centre-mounted motor to a roller shutter where a side wall leaves no room at the barrel end.
- Adding traffic lights and warning beacons to a yard door shared by lorries and pedestrians.
- Linking loading bay doors to dock leveller controls so levellers deploy only when the doors are fully open.
Safety law for industrial doors in Scotland
Industrial doors in Perth and Kinross are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Planning the work around your site
Sites in and around Perth and Kinross vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Prices for door automation and controls in Perth and Kinross
| Item | Guide price (ex VAT) |
|---|---|
| Manual-to-electric conversion | £1,195 – £3,195 |
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Perth and Kinross
Can you add interlocks or traffic lights to doors around Scotland?
Yes. We fit airlock interlocks, door-to-leveller interlocks, traffic lights and warning beacons to new and existing doors across Scotland, subject to compatibility with the control panels already fitted, and replace panels where they cannot accept the extra inputs.
Do automated doors in Perth and Kinross need more maintenance?
Powered doors need their motors, controls and safety devices checked as well as the mechanical parts, so at least an annual service is common practice, more often for busy doors. Servicing visits are chargeable; the survey for an automation job is free.
Can our door in Perth and Kinross be automated?
If the door is in good mechanical order and a suitable motor is available, usually yes. We check balance, springs, cables, guides and the curtain or panels on survey, and recommend repair or replacement first if needed.
Towns in Perth and Kinross we cover
We cover 4 towns in Perth and Kinross for door automation and controls, including Perth, Blairgowrie, Crieff, Kinross.
Other services in Perth and Kinross
- Sectional overhead doors
- Cold store and freezer doors
- Sliding and folding industrial doors
- Steel personnel and fire exit doors
- Industrial door repairs
- PVC strip curtains
- Fire shutters
- Industrial door replacement
More about Door automation and controls. Last updated 19 October 2026.