Door automation and controls in Brecon

At a glance

We can automate sectional doors, roller shutters and sliding doors in Brecon and across Powys, choosing direct, centre or chain-drive motors and the activation method that suits the traffic using each door.

Town: Brecon
Postcode district: LD3
Area: Powys
Survey: Free for new installations

Options that matter on site

Inverter drives. Soft start and stop with faster opening for high-cycle doors.
Manual-to-electric. Conversions for sectional, roller and sliding doors in good order.
Matched motors. The motor type and size are chosen for the door's weight, space and cycle count.
Manual override. Chain or crank override so doors open during power cuts.
Interlocks. Doors linked to each other, to levellers or to the alarm so they work in the right sequence.

Typical scopes of work

Replacing an obsolete control panel with a modern unit, then re-testing the safety devices and closing forces.
Converting hand-chained sectional doors to electric operation with push-button controls, safety edges and photocells.
Adding traffic lights and warning beacons to a yard door shared by lorries and pedestrians.

Powered door rules that apply in Brecon

Brecon is in Wales, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

For busy sites in Powys the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Guide prices for door automation and controls

Door automation and controls guide prices
Item	Guide price (ex VAT)
Manual-to-electric conversion	£1,195 – £3,195
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about door automation and controls

Can our door in Brecon be automated?

If the door is in good mechanical order and a suitable motor is available, usually yes. We check balance, springs, cables, guides and the curtain or panels on survey, and recommend repair or replacement first if needed.

Do you take responsibility for the conformity paperwork in Brecon?

Yes. When we convert a door to power, we carry out the risk assessment, test the door and issue the Declaration of Conformity and user instructions, as the person who has made it a machine.

Which activation would suit our Brecon site?

It depends on who uses the door. Buttons suit staff, remotes suit drivers, pull cords and loops suit forklifts, and radar suits mixed traffic. We look at your traffic on survey and recommend a set-up.

Door automation and controls near Brecon

Besides Brecon, we can survey and quote for sites in Merthyr Tydfil, Ebbw Vale, Aberdare and the rest of Powys.

Other services in Brecon

More about Door automation and controls · industrial doors in Brecon. Last updated 19 October 2026.