Door automation and controls in Greenock

In short

Door automation for warehouses, workshops and loading bays in Greenock. We convert manual doors to electric, fit motors and control panels, and add loops, radar, remotes and interlocks to suit how each door is used.

Town: Greenock
Postcode district: PA15
Area: Renfrewshire and Dunbartonshire
Survey: Free for new installations

What to specify

Safety devices. Safety edges, photocells and light curtains, force-tested to BS EN 12453.
Inverter drives. Frequency inverters move busy doors faster while cutting wear on every cycle.
Activation options. Buttons, key switches, remotes, pull cords, loops, radar and access control.
Manual-to-electric. Hand-operated doors converted to power, with the paperwork a powered door needs.
Traffic lights. Signals show drivers when the door is fully open and warn when it moves.

Examples of work we can quote for

Replacing an obsolete control panel with a modern unit, then re-testing the safety devices and closing forces.
Converting hand-chained sectional doors to electric operation with push-button controls, safety edges and photocells.
Adding radar with cross-traffic suppression to a door on a busy aisle so passing trucks do not open it.

Powered door rules that apply in Greenock

Greenock is in Scotland, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Sites in and around Greenock vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Budgeting for door automation and controls in Greenock

Door automation and controls guide prices
Item	Guide price (ex VAT)
Manual-to-electric conversion	£1,195 – £3,195
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Door automation and controls in Greenock: your questions

How long does a door automation job take in Greenock?

A straightforward conversion is usually completed and commissioned in a day. Loops, interlocks and traffic lights add time, and we plan the work so the door is out of use for as little time as possible.

How much does it cost to make a door electric in Greenock?

Our guide price for a manual-to-electric conversion is £1,195 to £3,195 ex VAT, including motor, control panel, basic controls and commissioning. Extra controls and safety devices are priced separately, and your fixed price in Greenock follows a free survey.

Can you add interlocks or traffic lights to doors around Renfrewshire and Dunbartonshire?

Yes. We fit airlock interlocks, door-to-leveller interlocks, traffic lights and warning beacons to new and existing doors across Renfrewshire and Dunbartonshire, subject to compatibility with the control panels already fitted, and replace panels where they cannot accept the extra inputs.

Door automation and controls near Greenock

Working in Greenock? We also take on jobs in Helensburgh, Dunoon, Dumbarton and across Renfrewshire and Dunbartonshire.

Other services in Greenock

More about Door automation and controls · industrial doors in Greenock. Last updated 19 October 2026.