Industrial door motor replacement in Arbroath

Quick answer

When the original motor on a door in Arbroath (DD11) is no longer made, we fit an equivalent drive with the adapters it needs, set new limits and test closing forces before handover.

Town: Arbroath
Postcode district: DD11
Area: Angus and Dundee
Guide price: £845 – £2,395

What the visit covers in Arbroath

Obsolete motors. Equivalent drives with adapters where the original model is no longer made.
Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Panel upgrades. New control panels with monitored safety inputs and inverter options.
Brake and override. Brakes tested and manual override checked on every change.
Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.

Examples of work we can quote for

Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.
Changing a tubular motor in a small service shutter that overheats and trips during busy periods.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.

Who is responsible for door safety at a site in Arbroath?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Service and repair visits in Arbroath are booked around your shifts. Doors and shutters are taken out of use one at a time, so the rest of the site keeps working while each one is checked.

Guide prices for industrial door motor replacement

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

Do you replace motors on any make of door across Angus and Dundee?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Angus and Dundee, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

How much does an industrial door motor replacement cost in Arbroath?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Arbroath costs £145 to £195 ex VAT.

Will our door in Arbroath be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Industrial door motor replacement near Arbroath

Besides Arbroath, we can survey and quote for sites in Montrose, Forfar, Dundee and the rest of Angus and Dundee.

Other services in Arbroath

More about Industrial door motor replacement · industrial doors in Arbroath. Last updated 19 October 2026.