Industrial door motor replacement in Argyll and Bute

In short

Motor replacement in Argyll and Bute starts with a chargeable diagnostic visit, then a written fixed price for the new drive and any other repairs the door needs before it goes back into use.

Area: Argyll and Bute
Nation: Scotland
Main town: Oban
Guide price: £845 – £2,395

How we look after doors in Argyll and Bute

Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.
Matched drives. Motor torque, speed and mounting matched to the door's weight and size.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.

Typical scopes of work

Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.

Safety law for industrial doors in Scotland

Industrial doors in Argyll and Bute are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Guide prices

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Guide prices apply to mainland UK sites. For Argyll and Bute, travel and access costs are added and shown in your written quote.

Questions from businesses in Argyll and Bute

Is the motor really the problem with our door in Argyll and Bute?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

How much does an industrial door motor replacement cost in Argyll and Bute?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Argyll and Bute costs £145 to £195 ex VAT.

Will our door in Argyll and Bute be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Towns in Argyll and Bute we cover

We cover 4 towns in Argyll and Bute for industrial door motor replacement, including Oban, Helensburgh, Dunoon, Campbeltown. Island and remote sites are covered by arrangement.

Other services in Argyll and Bute

More about Industrial door motor replacement. Last updated 19 October 2026.