Quick answer
Each door replacement in Argyll and Bute starts with a free survey and a written fixed price that lists the new door, strip-out, disposal and any opening repairs as separate lines.
- Area
- Argyll and Bute
- Nation
- Scotland
- Main town
- Oban
- Survey
- By arrangement
What we fit in Argyll and Bute
- Opening repairs. Damaged jambs and heads repaired or new framing fitted.
- Right door type. Replace with the same type or move to a door that suits your current needs.
- Commissioning. Each new door is tested and handed over with the documents it needs.
- Disposal. We take the old door away so there is nothing left on site to deal with.
- Minimal downtime. The new door is ready before the old one comes out, keeping downtime short.
Examples of work we can quote for
- Removing a rotted timber frame and fitting new steel jambs before installing a replacement roller shutter.
- Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
- Swapping a standard shutter for a security-rated door installed exactly to the manufacturer's certified specification.
Powered door rules that apply in Argyll and Bute
Argyll and Bute is in Scotland, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Keeping your site running during the work
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Guide prices for industrial door replacement
| Item | Guide price (ex VAT) |
|---|---|
| Strip-out and disposal on replacement | £345 – £1,195 per door |
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Guide prices apply to mainland UK sites. For Argyll and Bute, travel and access costs are added and shown in your written quote.
Industrial door replacement in Argyll and Bute: your questions
How long will our opening in Argyll and Bute be out of use?
The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.
Do you replace doors at multiple sites across Scotland?
Yes. We replace doors across Scotland, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.
Is the survey free for door replacement in Argyll and Bute?
Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.
Towns in Argyll and Bute we cover
We cover 4 towns in Argyll and Bute for industrial door replacement, including Oban, Helensburgh, Dunoon, Campbeltown. Island and remote sites are covered by arrangement.
Other services in Argyll and Bute
- Steel personnel and fire exit doors
- Cold store and freezer doors
- Door safety upgrades
- PVC strip curtains
- Fire shutter servicing and drop tests
- Industrial door motor replacement
- Sliding and folding industrial doors
- Dock levellers
More about Industrial door replacement. Last updated 19 October 2026.