Industrial door motor replacement in Kilwinning

The short version

Motor replacement in Kilwinning starts with a chargeable diagnostic visit, then a written fixed price for the new drive and any other repairs the door needs before it goes back into use.

Town: Kilwinning
Postcode district: KA13
Area: Ayrshire
Guide price: £845 – £2,395

How we look after doors in Kilwinning

Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Written records. You receive written details of the new drive and test results for your records.
Matched drives. Motor torque, speed and mounting matched to the door's weight and size.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
Obsolete motors. Equivalent drives with adapters where the original model is no longer made.

Typical scopes of work

Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.

Who is responsible for door safety at a site in Kilwinning?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

On a first visit we record each door's make, size, control type and condition. That record makes later repairs quicker to price and helps you plan replacements before a door fails.

Guide prices

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

How soon can a door motor in Kilwinning be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Should we replace the whole door instead of the motor in Kilwinning?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

How much does an industrial door motor replacement cost in Kilwinning?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Kilwinning costs £145 to £195 ex VAT.

Industrial door motor replacement near Kilwinning

Working in Kilwinning? We also take on jobs in Irvine, Troon, Kilmarnock and across Ayrshire.

Other services in Kilwinning

More about Industrial door motor replacement · industrial doors in Kilwinning. Last updated 19 October 2026.