Industrial door motor replacement in Irvine

The short version

Industrial door motor replacement for roller shutters, sectional doors and sliding doors in Irvine. We diagnose the fault, match a new drive to the door and re-commission it with safety devices tested.

Town: Irvine
Postcode district: KA12
Area: Ayrshire
Guide price: £845 – £2,395

What's included

Panel upgrades. New control panels with monitored safety inputs and inverter options.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
Written records. You receive written details of the new drive and test results for your records.
Obsolete motors. Equivalent drives with adapters where the original model is no longer made.
Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.

Examples of work we can quote for

Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.

Who is responsible for door safety at a site in Irvine?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Budgeting for industrial door motor replacement in Irvine

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Questions from businesses in Irvine

Can you replace an obsolete door motor in Irvine?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Should we replace the whole door instead of the motor in Irvine?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

How soon can a door motor in Irvine be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Industrial door motor replacement near Irvine

Irvine is in the KA12 postcode district in Ayrshire. We also cover Kilwinning, Troon, Kilmarnock.

Other services in Irvine

More about Industrial door motor replacement · industrial doors in Irvine. Last updated 19 October 2026.