Insulated roller shutter doors in Irvine

At a glance

Insulated roller doors suit premises in Irvine that need better thermal performance without giving up roof space. We supply, fit and commission them, and can service them afterwards on a schedule.

Town: Irvine
Postcode district: KA12
Area: Ayrshire
Survey: Free for new installations

Options that matter on site

Wind locks. On exposed elevations, wind locks hook the laths into the guides so gusts cannot push the curtain out.
Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.
Safety devices. Every powered door gets the safety functions its risk assessment calls for and is tested before handover.
Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.

Jobs we can carry out

Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.
Installing an insulated roller door with induction loop activation on a busy internal forklift route.
Adding wind locks and a heavier geared motor to a wide insulated roller door on an exposed elevation.

Who is responsible for door safety at a site in Irvine?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices for insulated roller shutter doors

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Insulated roller shutter doors in Irvine: your questions

Can you replace our old roller shutter in Irvine with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

How much does an insulated roller shutter door cost in Irvine?

Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Irvine opening free of charge and then put a fixed price in writing.

Is there enough headroom for an insulated roller door at our Irvine unit?

The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.

Insulated roller shutter doors near Irvine

Besides Irvine, we can survey and quote for sites in Kilwinning, Troon, Kilmarnock and the rest of Ayrshire.

Other services in Irvine

More about Insulated roller shutter doors · industrial doors in Irvine. Last updated 19 October 2026.