Industrial door motor replacement in Wisbech

In short

When the original motor on a door in Wisbech (PE13) is no longer made, we fit an equivalent drive with the adapters it needs, set new limits and test closing forces before handover.

Town: Wisbech
Postcode district: PE13
Area: Cambridgeshire
Guide price: £845 – £2,395

What our engineers check and fix

Written records. You receive written details of the new drive and test results for your records.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.

What this work can involve

Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.

Who is responsible for door safety at a site in Wisbech?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Service and repair visits in Wisbech are booked around your shifts. Doors and shutters are taken out of use one at a time, so the rest of the site keeps working while each one is checked.

Budgeting for industrial door motor replacement in Wisbech

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

How much does an industrial door motor replacement cost in Wisbech?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Wisbech costs £145 to £195 ex VAT.

Should we replace the whole door instead of the motor in Wisbech?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Can you replace an obsolete door motor in Wisbech?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Industrial door motor replacement near Wisbech

Working in Wisbech? We also take on jobs in March, King's Lynn, Spalding and across Cambridgeshire.

Other services in Wisbech

More about Industrial door motor replacement · industrial doors in Wisbech. Last updated 19 October 2026.