Industrial door motor replacement in Spalding

In short

When the original motor on a door in Spalding (PE11) is no longer made, we fit an equivalent drive with the adapters it needs, set new limits and test closing forces before handover.

Town: Spalding
Postcode district: PE11
Area: Lincolnshire
Guide price: £845 – £2,395

What our engineers check and fix

Matched drives. Motor torque, speed and mounting matched to the door's weight and size.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Panel upgrades. New control panels with monitored safety inputs and inverter options.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
Written records. A record of the work and tests for your maintenance file.

What this work can involve

Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Changing a tubular motor in a small service shutter that overheats and trips during busy periods.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.

Who is responsible for door safety at a site in Spalding?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Service and repair visits in Spalding are booked around your shifts. Doors and shutters are taken out of use one at a time, so the rest of the site keeps working while each one is checked.

Prices for industrial door motor replacement in Spalding

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

Do you replace motors on any make of door across Lincolnshire?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Lincolnshire, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

Will our door in Spalding be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

How much does an industrial door motor replacement cost in Spalding?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Spalding costs £145 to £195 ex VAT.

Industrial door motor replacement near Spalding

Working in Spalding? We also take on jobs in Boston, Peterborough, Wisbech and across Lincolnshire.

Other services in Spalding

More about Industrial door motor replacement · industrial doors in Spalding. Last updated 19 October 2026.