Industrial door motor replacement in Ellesmere Port

At a glance

We can replace failed and obsolete door motors in Ellesmere Port and across Cheshire, from tubular motors in small service shutters to heavy-duty chain drives on large, heavy sectional and sliding doors.

Town: Ellesmere Port
Postcode district: CH65
Area: Cheshire
Guide price: £845 – £2,395

How we look after doors in Ellesmere Port

Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Written records. A record of the work and tests for your maintenance file.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.

Jobs we can carry out

Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Changing a tubular motor in a small service shutter that overheats and trips during busy periods.

Who is responsible for door safety at a site in Ellesmere Port?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Prices for industrial door motor replacement in Ellesmere Port

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

How soon can a door motor in Ellesmere Port be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Is the motor really the problem with our door in Ellesmere Port?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Should we replace the whole door instead of the motor in Ellesmere Port?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Industrial door motor replacement near Ellesmere Port

Ellesmere Port is in the CH65 postcode district in Cheshire. We also cover Chester, Halewood, Bebington.

Other services in Ellesmere Port

More about Industrial door motor replacement · industrial doors in Ellesmere Port. Last updated 19 October 2026.