Industrial door motor replacement in Hull

The short version

Motor replacement in Hull starts with a chargeable diagnostic visit, then a written fixed price for the new drive and any other repairs the door needs before it goes back into use.

Town: Hull
Postcode district: HU1
Area: East Riding of Yorkshire
Guide price: £845 – £2,395

What's included

Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Brake and override. Brakes tested and manual override checked on every change.
Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Written records. You receive written details of the new drive and test results for your records.

What this work can involve

Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.

Safety law for industrial doors in England

Industrial doors in Hull are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Guide prices

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

How soon can a door motor in Hull be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Can you replace an obsolete door motor in Hull?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

How much does an industrial door motor replacement cost in Hull?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Hull costs £145 to £195 ex VAT.

Industrial door motor replacement near Hull

Besides Hull, we can survey and quote for sites in Beverley, Grimsby, Scunthorpe and the rest of the East Riding of Yorkshire.

Other services in Hull

More about Industrial door motor replacement · industrial doors in Hull. Last updated 19 October 2026.