Industrial door motor replacement in Clacton-on-Sea

The short version

Industrial door motor replacement for roller shutters, sectional doors and sliding doors in Clacton-on-Sea. We diagnose the fault, match a new drive to the door and re-commission it with safety devices tested.

Town: Clacton-on-Sea
Postcode district: CO15
Area: Essex
Guide price: £845 – £2,395

What's included

Panel upgrades. New control panels with monitored safety inputs and inverter options.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.
Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
Obsolete motors. Equivalent drives with adapters where the original model is no longer made.

Jobs we can carry out

Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.

Powered door rules that apply in Clacton-on-Sea

Clacton-on-Sea is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Guide prices

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

Is the motor really the problem with our door in Clacton-on-Sea?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Can you replace an obsolete door motor in Clacton-on-Sea?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Should we replace the whole door instead of the motor in Clacton-on-Sea?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Industrial door motor replacement near Clacton-on-Sea

Clacton-on-Sea is in the CO15 postcode district in Essex. We also cover Harwich, Colchester, Felixstowe.

Other services in Clacton-on-Sea

More about Industrial door motor replacement · industrial doors in Clacton-on-Sea. Last updated 19 October 2026.