Industrial door motor replacement in Falkirk

Quick answer

We can replace failed and obsolete door motors in Falkirk and across Forth Valley, from tubular motors in small service shutters to heavy-duty chain drives on large, heavy sectional and sliding doors.

Town: Falkirk
Postcode district: FK1
Area: Forth Valley
Guide price: £845 – £2,395

What our engineers check and fix

Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Brake and override. Brakes tested and manual override checked on every change.
Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Written records. A record of the work and tests for your maintenance file.

Typical scopes of work

Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.

Who is responsible for door safety at a site in Falkirk?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

On a first visit we record each door's make, size, control type and condition. That record makes later repairs quicker to price and helps you plan replacements before a door fails.

Guide prices for industrial door motor replacement

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Industrial door motor replacement in Falkirk: your questions

Will our door in Falkirk be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

How soon can a door motor in Falkirk be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Can you replace an obsolete door motor in Falkirk?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Industrial door motor replacement near Falkirk

Working in Falkirk? We also take on jobs in Grangemouth, Bo'ness, Alloa and across Forth Valley.

Other services in Falkirk

More about Industrial door motor replacement · industrial doors in Falkirk. Last updated 19 October 2026.