Industrial door motor replacement in Holloway

In short

Industrial door motor replacement for roller shutters, sectional doors and sliding doors in Holloway. We diagnose the fault, match a new drive to the door and re-commission it with safety devices tested.

Town: Holloway
Postcode district: N7
Area: Greater London
Guide price: £845 – £2,395

What our engineers check and fix

Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.
Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.

Typical scopes of work

Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.

Who is responsible for door safety at a site in Holloway?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Service and repair visits in Holloway are booked around your shifts. Doors and shutters are taken out of use one at a time, so the rest of the site keeps working while each one is checked.

Budgeting for industrial door motor replacement in Holloway

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

Can you replace an obsolete door motor in Holloway?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Is the motor really the problem with our door in Holloway?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

How soon can a door motor in Holloway be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Industrial door motor replacement near Holloway

Working in Holloway? We also take on jobs in Highbury, Camden Town, Islington and across Greater London.

Other services in Holloway

More about Industrial door motor replacement · industrial doors in Holloway. Last updated 19 October 2026.