Industrial door motor replacement in Kilburn

In short

We can replace failed and obsolete door motors in Kilburn and across Greater London, from tubular motors in small service shutters to heavy-duty chain drives on large, heavy sectional and sliding doors.

Town: Kilburn
Postcode district: NW6
Area: Greater London
Guide price: £845 – £2,395

What our engineers check and fix

Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Panel upgrades. New control panels with monitored safety inputs and inverter options.
Brake and override. Brakes tested and manual override checked on every change.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.

What this work can involve

Changing a tubular motor in a small service shutter that overheats and trips during busy periods.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.

Powered door rules that apply in Kilburn

Kilburn is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Budgeting for industrial door motor replacement in Kilburn

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

Do you replace motors on any make of door across Greater London?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Greater London, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

Is the motor really the problem with our door in Kilburn?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

How much does an industrial door motor replacement cost in Kilburn?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Kilburn costs £145 to £195 ex VAT.

Industrial door motor replacement near Kilburn

Our teams cover Kilburn (NW6) and nearby Cricklewood, Camden Town, Willesden, along with the rest of Greater London.

Other services in Kilburn

More about Industrial door motor replacement · industrial doors in Kilburn. Last updated 19 October 2026.