Industrial door motor replacement in Bury

In short

When the original motor on a door in Bury (BL9) is no longer made, we fit an equivalent drive with the adapters it needs, set new limits and test closing forces before handover.

Town: Bury
Postcode district: BL9
Area: Greater Manchester
Guide price: £845 – £2,395

What's included

Written records. You receive written details of the new drive and test results for your records.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.

Typical scopes of work

Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.

Safety law for industrial doors in England

Industrial doors in Bury are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Guide prices for industrial door motor replacement

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

Should we replace the whole door instead of the motor in Bury?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Will our door in Bury be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

How much does an industrial door motor replacement cost in Bury?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Bury costs £145 to £195 ex VAT.

Industrial door motor replacement near Bury

Bury is in the BL9 postcode district in Greater Manchester. We also cover Radcliffe, Heywood, Whitefield.

Other services in Bury

More about Industrial door motor replacement · industrial doors in Bury. Last updated 19 October 2026.