Industrial door motor replacement in Radcliffe

In short

Door stalling, grinding or creeping down at your Radcliffe site? It may need a new motor, or the motor may be suffering from a fault elsewhere. We diagnose which it is before recommending anything.

Town: Radcliffe
Postcode district: M26
Area: Greater Manchester
Guide price: £845 – £2,395

What our engineers check and fix

Written records. You receive written details of the new drive and test results for your records.
Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Obsolete motors. Equivalent drives with adapters where the original model is no longer made.
Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.

Examples of work we can quote for

Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.

Powered door rules that apply in Radcliffe

Radcliffe is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

On a first visit we record each door's make, size, control type and condition. That record makes later repairs quicker to price and helps you plan replacements before a door fails.

Guide prices for industrial door motor replacement

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

How much does an industrial door motor replacement cost in Radcliffe?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Radcliffe costs £145 to £195 ex VAT.

Can you replace an obsolete door motor in Radcliffe?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Do you replace motors on any make of door across Greater Manchester?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Greater Manchester, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

Industrial door motor replacement near Radcliffe

Our teams cover Radcliffe (M26) and nearby Whitefield, Prestwich, Bury, along with the rest of Greater Manchester.

Other services in Radcliffe

More about Industrial door motor replacement · industrial doors in Radcliffe. Last updated 19 October 2026.