Industrial door replacement in Radcliffe

In short

Replacing a door at a unit in Radcliffe (M26) is a chance to upgrade: insulated instead of single skin, electric instead of manual, or high-speed where the opening is busy.

Town: Radcliffe
Postcode district: M26
Area: Greater Manchester
Survey: Free for new installations

Options for industrial door replacement in Radcliffe

Right door type. Replace with the same type or move to a door that suits your current needs.
Commissioning. Safety devices tested, forces measured and instructions handed over.
Free survey. Existing door, opening and space assessed free of charge.
Disposal. We take the old door away so there is nothing left on site to deal with.
Ongoing servicing. New door added to a maintenance schedule from year one.

Jobs we can carry out

Changing a manual sliding door for a new electric sectional door running on low-headroom tracks.
Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Replacing a corroded single-skin roller shutter on a trade unit with an insulated roller door and electric operation.

Who is responsible for door safety at a site in Radcliffe?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial door replacement

Do you replace doors at multiple sites across Greater Manchester?

Yes. We replace doors across Greater Manchester, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.

Can we change door type when replacing at our Radcliffe unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

How long will our opening in Radcliffe be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

Industrial door replacement near Radcliffe

Radcliffe is in the M26 postcode district in Greater Manchester. We also cover Whitefield, Prestwich, Bury.

Other services in Radcliffe

More about Industrial door replacement · industrial doors in Radcliffe. Last updated 19 October 2026.