Industrial door replacement in Swinton

At a glance

We can replace roller shutters, sectional doors, sliding doors and high-speed doors in Swinton and across Greater Manchester, removing and disposing of the old door and fitting the new one in a single, carefully planned visit.

Town: Swinton
Postcode district: M27
Area: Greater Manchester
Survey: Free for new installations

Options that matter on site

Commissioning. Each new door is tested and handed over with the documents it needs.
Minimal downtime. The new door is ready before the old one comes out, keeping downtime short.
Ongoing servicing. New door added to a maintenance schedule from year one.
Free survey. We inspect the old door and measure the opening at no cost before quoting.
Opening repairs. Damaged jambs and heads repaired or new framing fitted.

What this work can involve

Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Replacing a busy internal shutter with a high-speed fabric door so the opening is no longer left standing open.

Powered door rules that apply in Swinton

Swinton is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial door replacement in Swinton: your questions

Should we repair or replace our door in Swinton?

If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.

Can we change door type when replacing at our Swinton unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

Is the survey free for door replacement in Swinton?

Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.

Industrial door replacement near Swinton

Our teams cover Swinton (M27) and nearby Eccles, Walkden, Salford, along with the rest of Greater Manchester.

Other services in Swinton

More about Industrial door replacement · industrial doors in Swinton. Last updated 19 October 2026.