Industrial door replacement in Greater Manchester

In short

Industrial door replacement in Greater Manchester: free survey, safe strip-out of the old door, repairs to the opening where needed, and a new door installed, commissioned and handed over with its paperwork.

Area: Greater Manchester
Nation: England
Main town: Manchester
Survey: Free for new installations

Options for industrial door replacement in Greater Manchester

Ongoing servicing. We can service the new door from the start so its history begins on day one.
Commissioning. Each new door is tested and handed over with the documents it needs.
Minimal downtime. The new door is ready before the old one comes out, keeping downtime short.
Disposal. Old doors taken away for recycling or disposal.
Free survey. We inspect the old door and measure the opening at no cost before quoting.

Examples of work we can quote for

Replacing a busy internal shutter with a high-speed fabric door so the opening is no longer left standing open.
Phasing the replacement of several loading doors so only one bay is out of use at a time.
Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.

Who is responsible for door safety at a site in Greater Manchester?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices for industrial door replacement

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial door replacement in Greater Manchester: your questions

Do you replace doors at multiple sites across the North West?

Yes. We replace doors across the North West, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.

How much does industrial door replacement cost in Greater Manchester?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Greater Manchester.

Can we change door type when replacing at our Greater Manchester unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

Towns in Greater Manchester we cover

We cover 37 towns in Greater Manchester for industrial door replacement, including Manchester, Oldham, Wigan, Bolton.

Other services in Greater Manchester

More about Industrial door replacement. Last updated 19 October 2026.