Industrial door replacement in Ashton-in-Makerfield

At a glance

We can replace roller shutters, sectional doors, sliding doors and high-speed doors in Ashton-in-Makerfield and across Greater Manchester, removing and disposing of the old door and fitting the new one in a single, carefully planned visit.

Town: Ashton-in-Makerfield
Postcode district: WN4
Area: Greater Manchester
Survey: Free for new installations

What to specify

Opening repairs. Damaged jambs and heads repaired or new framing fitted.
Disposal. We take the old door away so there is nothing left on site to deal with.
Minimal downtime. The new door is ready before the old one comes out, keeping downtime short.
Safe strip-out. Springs unwound and the old door dismantled safely.
Ongoing servicing. We can service the new door from the start so its history begins on day one.

Typical scopes of work

Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Replacing a busy internal shutter with a high-speed fabric door so the opening is no longer left standing open.

Powered door rules that apply in Ashton-in-Makerfield

Ashton-in-Makerfield is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Sites in and around Ashton-in-Makerfield vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices for industrial door replacement

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial door replacement

Do you replace doors at multiple sites across Greater Manchester?

Yes. We replace doors across Greater Manchester, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.

Should we repair or replace our door in Ashton-in-Makerfield?

If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.

How much does industrial door replacement cost in Ashton-in-Makerfield?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Ashton-in-Makerfield.

Industrial door replacement near Ashton-in-Makerfield

Our teams cover Ashton-in-Makerfield (WN4) and nearby Golborne, Newton-le-Willows, St Helens, along with the rest of Greater Manchester.

Other services in Ashton-in-Makerfield

More about Industrial door replacement · industrial doors in Ashton-in-Makerfield. Last updated 19 October 2026.