Industrial door replacement in Wigan

In short

We can replace roller shutters, sectional doors, sliding doors and high-speed doors in Wigan and across Greater Manchester, removing and disposing of the old door and fitting the new one in a single, carefully planned visit.

Town: Wigan
Postcode district: WN1
Area: Greater Manchester
Survey: Free for new installations

Options that matter on site

Opening repairs. Damaged jambs and heads repaired or new framing fitted.
Ongoing servicing. We can service the new door from the start so its history begins on day one.
Commissioning. Safety devices tested, forces measured and instructions handed over.
Minimal downtime. Made-to-measure door ordered first so the swap takes a day.
Right door type. Replace with the same type or move to a door that suits your current needs.

Typical scopes of work

Phasing the replacement of several loading doors so only one bay is out of use at a time.
Changing a manual sliding door for a new electric sectional door running on low-headroom tracks.
Swapping a standard shutter for a security-rated door installed exactly to the manufacturer's certified specification.

Safety law for industrial doors in England

Industrial doors in Wigan are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Keeping your site running during the work

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial door replacement

How long will our opening in Wigan be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

Can we change door type when replacing at our Wigan unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

How much does industrial door replacement cost in Wigan?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Wigan.

Industrial door replacement near Wigan

Besides Wigan, we can survey and quote for sites in Hindley, Ashton-in-Makerfield, Westhoughton and the rest of Greater Manchester.

Other services in Wigan

More about Industrial door replacement · industrial doors in Wigan. Last updated 19 October 2026.