Industrial door motor replacement in Salford

In short

Motor replacement in Salford starts with a chargeable diagnostic visit, then a written fixed price for the new drive and any other repairs the door needs before it goes back into use.

Town: Salford
Postcode district: M6
Area: Greater Manchester
Guide price: £845 – £2,395

What's included

Obsolete motors. Equivalent drives with adapters where the original model is no longer made.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.
Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.

Typical scopes of work

Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.
Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.

Safety law for industrial doors in England

Industrial doors in Salford are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Guide prices

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Questions from businesses in Salford

Can you replace an obsolete door motor in Salford?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Should we replace the whole door instead of the motor in Salford?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Is the motor really the problem with our door in Salford?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Industrial door motor replacement near Salford

Salford is in the M6 postcode district in Greater Manchester. We also cover Eccles, Manchester, Swinton.

Other services in Salford

More about Industrial door motor replacement · industrial doors in Salford. Last updated 19 October 2026.