Industrial door motor replacement in Urmston

Quick answer

Industrial door motor replacement for roller shutters, sectional doors and sliding doors in Urmston. We diagnose the fault, match a new drive to the door and re-commission it with safety devices tested.

Town: Urmston
Postcode district: M41
Area: Greater Manchester
Guide price: £845 – £2,395

What the visit covers in Urmston

Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.
Written records. You receive written details of the new drive and test results for your records.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.

What this work can involve

Changing a tubular motor in a small service shutter that overheats and trips during busy periods.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.

Powered door rules that apply in Urmston

Urmston is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Budgeting for industrial door motor replacement in Urmston

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Industrial door motor replacement in Urmston: your questions

Should we replace the whole door instead of the motor in Urmston?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Do you replace motors on any make of door across Greater Manchester?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Greater Manchester, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

Can you replace an obsolete door motor in Urmston?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Industrial door motor replacement near Urmston

Our teams cover Urmston (M41) and nearby Stretford, Sale, Eccles, along with the rest of Greater Manchester.

Other services in Urmston

More about Industrial door motor replacement · industrial doors in Urmston. Last updated 19 October 2026.