Industrial door motor replacement in Harrogate

The short version

Door stalling, grinding or creeping down at your Harrogate site? It may need a new motor, or the motor may be suffering from a fault elsewhere. We diagnose which it is before recommending anything.

Town: Harrogate
Postcode district: HG2
Area: North Yorkshire
Guide price: £845 – £2,395

What our engineers check and fix

Written records. You receive written details of the new drive and test results for your records.
Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.
Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Obsolete motors. Equivalent drives with adapters where the original model is no longer made.
Panel upgrades. New control panels with monitored safety inputs and inverter options.

Typical scopes of work

Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.

Who is responsible for door safety at a site in Harrogate?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Prices for industrial door motor replacement in Harrogate

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

Will our door in Harrogate be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Should we replace the whole door instead of the motor in Harrogate?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Can you replace an obsolete door motor in Harrogate?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Industrial door motor replacement near Harrogate

Harrogate is in the HG2 postcode district in North Yorkshire. We also cover Yeadon, Guiseley, Leeds.

Other services in Harrogate

More about Industrial door motor replacement · industrial doors in Harrogate. Last updated 19 October 2026.