Industrial door motor replacement in Scarborough

At a glance

When the original motor on a door in Scarborough (YO11) is no longer made, we fit an equivalent drive with the adapters it needs, set new limits and test closing forces before handover.

Town: Scarborough
Postcode district: YO11
Area: North Yorkshire
Guide price: £845 – £2,395

How we look after doors in Scarborough

Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
Obsolete motors. Equivalent drives with adapters where the original model is no longer made.
Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.
Re-commissioning. Limits set, cycles tested and safety devices checked before handover.

Typical scopes of work

Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.

Who is responsible for door safety at a site in Scarborough?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Prices for industrial door motor replacement in Scarborough

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

Is the motor really the problem with our door in Scarborough?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Can you replace an obsolete door motor in Scarborough?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

How much does an industrial door motor replacement cost in Scarborough?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Scarborough costs £145 to £195 ex VAT.

Industrial door motor replacement near Scarborough

Our teams cover Scarborough (YO11) and nearby Bridlington, Beverley, Redcar, along with the rest of North Yorkshire.

Other services in Scarborough

More about Industrial door motor replacement · industrial doors in Scarborough. Last updated 19 October 2026.