Industrial door replacement in Ilkeston

In short

Each door replacement in Ilkeston starts with a free survey and a written fixed price that lists the new door, strip-out, disposal and any opening repairs as separate lines.

Town: Ilkeston
Postcode district: DE7
Area: Derbyshire
Survey: Free for new installations

Options for industrial door replacement in Ilkeston

Disposal. We take the old door away so there is nothing left on site to deal with.
Ongoing servicing. New door added to a maintenance schedule from year one.
Right door type. Replace with the same type or move to a door that suits your current needs.
Commissioning. Safety devices tested, forces measured and instructions handed over.
Minimal downtime. Made-to-measure door ordered first so the swap takes a day.

Typical scopes of work

Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Phasing the replacement of several loading doors so only one bay is out of use at a time.
Removing a rotted timber frame and fitting new steel jambs before installing a replacement roller shutter.

Who is responsible for door safety at a site in Ilkeston?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

How much does industrial door replacement cost in Ilkeston?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Ilkeston.

Do you replace doors at multiple sites across Derbyshire?

Yes. We replace doors across Derbyshire, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.

Can we change door type when replacing at our Ilkeston unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

Industrial door replacement near Ilkeston

Besides Ilkeston, we can survey and quote for sites in Heanor, Long Eaton, Ripley and the rest of Derbyshire.

Other services in Ilkeston

More about Industrial door replacement · industrial doors in Ilkeston. Last updated 19 October 2026.