The short version
Is an old door at your South Yorkshire site costing more in repairs than it is worth? We price replacement alongside repair so you can compare, then handle the whole changeover if replacement makes sense.
- Area
- South Yorkshire
- Nation
- England
- Main town
- Sheffield
- Survey
- Free for new installations
What to specify
- Disposal. We take the old door away so there is nothing left on site to deal with.
- Free survey. We inspect the old door and measure the opening at no cost before quoting.
- Commissioning. Each new door is tested and handed over with the documents it needs.
- Opening repairs. Damaged jambs and heads repaired or new framing fitted.
- Right door type. Replace with the same type or move to a door that suits your current needs.
Typical scopes of work
- Replacing a busy internal shutter with a high-speed fabric door so the opening is no longer left standing open.
- Phasing the replacement of several loading doors so only one bay is out of use at a time.
- Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Powered door rules that apply in South Yorkshire
South Yorkshire is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Keeping your site running during the work
Most installations in South Yorkshire can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.
Guide prices for industrial door replacement
| Item | Guide price (ex VAT) |
|---|---|
| Strip-out and disposal on replacement | £345 – £1,195 per door |
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about industrial door replacement
Do you replace doors at multiple sites across Yorkshire and the Humber?
Yes. We replace doors across Yorkshire and the Humber, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.
How much does industrial door replacement cost in South Yorkshire?
Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in South Yorkshire.
How long will our opening in South Yorkshire be out of use?
The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.
Towns in South Yorkshire we cover
We cover 4 towns in South Yorkshire for industrial door replacement, including Sheffield, Rotherham, Doncaster, Barnsley.
Other services in South Yorkshire
- Industrial roller shutters
- Cold store and freezer doors
- Industrial door repairs
- Fire shutters
- Door automation and controls
- Insulated roller shutter doors
- Bollards and door protection
- Fire shutter servicing and drop tests
More about Industrial door replacement. Last updated 19 October 2026.