In short
We can replace roller shutters, sectional doors, sliding doors and high-speed doors in Dyfed and across Wales, removing and disposing of the old door and fitting the new one in a single, carefully planned visit.
- Area
- Dyfed
- Nation
- Wales
- Main town
- Carmarthen
- Survey
- Free for new installations
Options that matter on site
- Minimal downtime. Made-to-measure door ordered first so the swap takes a day.
- Commissioning. Safety devices tested, forces measured and instructions handed over.
- Ongoing servicing. We can service the new door from the start so its history begins on day one.
- Safe strip-out. Tensioned springs and heavy parts are removed by trained engineers.
- Free survey. Existing door, opening and space assessed free of charge.
Typical scopes of work
- Phasing the replacement of several loading doors so only one bay is out of use at a time.
- Changing a manual sliding door for a new electric sectional door running on low-headroom tracks.
- Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Safety law for industrial doors in Wales
Industrial doors in Dyfed are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Access, phasing and timing
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Strip-out and disposal on replacement | £345 – £1,195 per door |
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about industrial door replacement
How long will our opening in Dyfed be out of use?
The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.
Do you replace doors at multiple sites across Wales?
Yes. We replace doors across Wales, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.
Is the survey free for door replacement in Dyfed?
Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.
Towns in Dyfed we cover
We cover 6 towns in Dyfed for industrial door replacement, including Carmarthen, Llanelli, Ammanford, Aberystwyth.
Other services in Dyfed
- Industrial door motor replacement
- Door automation and controls
- PVC strip curtains
- Fire shutter servicing and drop tests
- Insulated roller shutter doors
- Fire shutters
- Complete loading bays
- Planned maintenance contracts
More about Industrial door replacement. Last updated 19 October 2026.