The short version
Is an old door at your Powys site costing more in repairs than it is worth? We price replacement alongside repair so you can compare, then handle the whole changeover if replacement makes sense.
- Area
- Powys
- Nation
- Wales
- Main town
- Newtown
- Survey
- Free for new installations
What we fit in Powys
- Minimal downtime. Made-to-measure door ordered first so the swap takes a day.
- Opening repairs. Damaged jambs and heads repaired or new framing fitted.
- Disposal. We take the old door away so there is nothing left on site to deal with.
- Commissioning. Safety devices tested, forces measured and instructions handed over.
- Safe strip-out. Tensioned springs and heavy parts are removed by trained engineers.
Typical scopes of work
- Phasing the replacement of several loading doors so only one bay is out of use at a time.
- Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
- Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Powered door rules that apply in Powys
Powys is in Wales, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Access, phasing and timing
Most installations in Powys can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Strip-out and disposal on replacement | £345 – £1,195 per door |
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Industrial door replacement in Powys: your questions
Can we change door type when replacing at our Powys unit?
Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.
How long will our opening in Powys be out of use?
The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.
Is the survey free for door replacement in Powys?
Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.
Towns in Powys we cover
We cover 5 towns in Powys for industrial door replacement, including Newtown, Brecon, Ystradgynlais, Welshpool.
Other services in Powys
- Door automation and controls
- Industrial door motor replacement
- Dock shelters and seals
- Industrial roller shutters
- Sliding and folding industrial doors
- Impact traffic doors
- Industrial door repairs
- Door safety upgrades
More about Industrial door replacement. Last updated 19 October 2026.