In short
Replacing a door at a unit in Cwmbran (NP44) is a chance to upgrade: insulated instead of single skin, electric instead of manual, or high-speed where the opening is busy.
- Town
- Cwmbran
- Postcode district
- NP44
- Area
- Gwent
- Survey
- Free for new installations
What to specify
- Opening repairs. Any damage to the opening is put right so the new door fixes securely.
- Minimal downtime. Made-to-measure door ordered first so the swap takes a day.
- Ongoing servicing. We can service the new door from the start so its history begins on day one.
- Safe strip-out. Tensioned springs and heavy parts are removed by trained engineers.
- Commissioning. Safety devices tested, forces measured and instructions handed over.
Jobs we can carry out
- Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
- Replacing a busy internal shutter with a high-speed fabric door so the opening is no longer left standing open.
- Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Who is responsible for door safety at a site in Cwmbran?
In Wales, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
How the work is organised
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Budgeting for industrial door replacement in Cwmbran
| Item | Guide price (ex VAT) |
|---|---|
| Strip-out and disposal on replacement | £345 – £1,195 per door |
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Cwmbran
Is the survey free for door replacement in Cwmbran?
Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.
Can we change door type when replacing at our Cwmbran unit?
Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.
Should we repair or replace our door in Cwmbran?
If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.
Industrial door replacement near Cwmbran
Working in Cwmbran? We also take on jobs in Pontypool, Risca, Newport (Gwent) and across Gwent.
- Industrial door replacement in Pontypool
- Industrial door replacement in Risca
- Industrial door replacement in Newport (Gwent)
- Industrial door replacement in Caerphilly
- Industrial door replacement in Abergavenny
- Industrial door replacement in Ebbw Vale
Other services in Cwmbran
- Industrial roller shutters
- Sliding and folding industrial doors
- Sectional overhead doors
- Cold store and freezer doors
- Industrial door installation
- Hangar and large-span doors
- Door automation and controls
- Fire shutter servicing and drop tests
More about Industrial door replacement · industrial doors in Cwmbran. Last updated 19 October 2026.
