Industrial door replacement in Rochester

In short

Each door replacement in Rochester starts with a free survey and a written fixed price that lists the new door, strip-out, disposal and any opening repairs as separate lines.

Town: Rochester
Postcode district: ME1
Area: Kent
Survey: Free for new installations

What we fit in Rochester

Opening repairs. Damaged jambs and heads repaired or new framing fitted.
Right door type. Like-for-like or an upgrade to suit how the opening is used now.
Safe strip-out. Tensioned springs and heavy parts are removed by trained engineers.
Minimal downtime. The new door is ready before the old one comes out, keeping downtime short.
Ongoing servicing. New door added to a maintenance schedule from year one.

What this work can involve

Swapping a standard shutter for a security-rated door installed exactly to the manufacturer's certified specification.
Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Replacing a corroded single-skin roller shutter on a trade unit with an insulated roller door and electric operation.

Powered door rules that apply in Rochester

Rochester is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

Sites in and around Rochester vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial door replacement

Should we repair or replace our door in Rochester?

If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.

Can we change door type when replacing at our Rochester unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

Is the survey free for door replacement in Rochester?

Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.

Industrial door replacement near Rochester

Working in Rochester? We also take on jobs in Chatham, Strood, Gillingham and across Kent.

Other services in Rochester

More about Industrial door replacement · industrial doors in Rochester. Last updated 19 October 2026.