Sliding and folding industrial doors in Rochester

Quick answer

Each sliding or folding door project in Rochester starts with a free survey of the opening, side room, floor and structure, followed by a written fixed price before any work starts.

Town: Rochester
Postcode district: ME1
Area: Kent
Survey: Free for new installations

What to specify

Robust build. Steel-framed leaves with steel, panel or timber cladding.
No headroom needed. With side-opening leaves, cranes, lights and services overhead stay clear.
Electric operation. Motor drives with safety edges, photocells and guarding where needed.
Top-hung or bottom-rolling. We hang the door from above or run it on a floor rail depending on what the building can support.
Insulated options. Leaves can be filled with insulated panels and sealed along their edges to cut heat loss.

What this work can involve

Adding a steel support beam and top-hung track so a sliding door leaves the floor flush for forklifts.
Replacing worn timber sliding doors on a storage building with steel-framed bottom-rolling doors and a wicket door.
Installing telescopic sliding doors where the wall space to one side is limited by an adjoining structure.

Who is responsible for door safety at a site in Rochester?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Budgeting for sliding and folding industrial doors in Rochester

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Sliding and folding industrial doors in Rochester: your questions

Will a sliding door fit our building in Rochester?

It needs wall space to the side for the leaves to slide past, or room for folded leaves to stack. We measure this on survey and choose between sliding, telescopic and folding layouts to suit what is there.

Which is better for our Rochester site, top-hung or bottom-rolling?

Top-hung keeps the floor flush but needs a strong structure overhead. Bottom-rolling suits lighter buildings but needs a clean, protected floor rail. We recommend one after checking both on survey.

How long does it take to fit sliding doors in Rochester?

A pair of manual sliding doors on a sound structure is usually fitted in a day or two. Large folding doors, electric operation and new steelwork add time, which we set out with your quote.

Sliding and folding industrial doors near Rochester

Our teams cover Rochester (ME1) and nearby Chatham, Strood, Gillingham, along with the rest of Kent.

Other services in Rochester

More about Sliding and folding industrial doors · industrial doors in Rochester. Last updated 19 October 2026.