Industrial door replacement in Cleethorpes

In short

Replacing a door at a unit in Cleethorpes (DN35) is a chance to upgrade: insulated instead of single skin, electric instead of manual, or high-speed where the opening is busy.

Town: Cleethorpes
Postcode district: DN35
Area: Lincolnshire
Survey: Free for new installations

What we fit in Cleethorpes

Opening repairs. Any damage to the opening is put right so the new door fixes securely.
Disposal. Old doors taken away for recycling or disposal.
Commissioning. Safety devices tested, forces measured and instructions handed over.
Right door type. Like-for-like or an upgrade to suit how the opening is used now.
Ongoing servicing. We can service the new door from the start so its history begins on day one.

What this work can involve

Replacing a corroded single-skin roller shutter on a trade unit with an insulated roller door and electric operation.
Removing a rotted timber frame and fitting new steel jambs before installing a replacement roller shutter.
Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.

Powered door rules that apply in Cleethorpes

Cleethorpes is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices for industrial door replacement

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial door replacement

Should we repair or replace our door in Cleethorpes?

If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.

How much does industrial door replacement cost in Cleethorpes?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Cleethorpes.

Is the survey free for door replacement in Cleethorpes?

Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.

Industrial door replacement near Cleethorpes

Besides Cleethorpes, we can survey and quote for sites in Grimsby, Hull, Beverley and the rest of Lincolnshire.

Other services in Cleethorpes

More about Industrial door replacement · industrial doors in Cleethorpes. Last updated 19 October 2026.