Industrial door replacement in Redcar

The short version

Replacing a door at a unit in Redcar (TS10) is a chance to upgrade: insulated instead of single skin, electric instead of manual, or high-speed where the opening is busy.

Town: Redcar
Postcode district: TS10
Area: North Yorkshire
Survey: Free for new installations

Options that matter on site

Minimal downtime. The new door is ready before the old one comes out, keeping downtime short.
Commissioning. Each new door is tested and handed over with the documents it needs.
Free survey. Existing door, opening and space assessed free of charge.
Safe strip-out. Springs unwound and the old door dismantled safely.
Opening repairs. Damaged jambs and heads repaired or new framing fitted.

Typical scopes of work

Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Swapping a standard shutter for a security-rated door installed exactly to the manufacturer's certified specification.
Phasing the replacement of several loading doors so only one bay is out of use at a time.

Who is responsible for door safety at a site in Redcar?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial door replacement in Redcar: your questions

How much does industrial door replacement cost in Redcar?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Redcar.

Should we repair or replace our door in Redcar?

If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.

How long will our opening in Redcar be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

Industrial door replacement near Redcar

Our teams cover Redcar (TS10) and nearby Middlesbrough, Hartlepool, Billingham, along with the rest of North Yorkshire.

Other services in Redcar

More about Industrial door replacement · industrial doors in Redcar. Last updated 19 October 2026.