Industrial door replacement in Wellingborough

The short version

We can replace roller shutters, sectional doors, sliding doors and high-speed doors in Wellingborough and across Northamptonshire, removing and disposing of the old door and fitting the new one in a single, carefully planned visit.

Town: Wellingborough
Postcode district: NN8
Area: Northamptonshire
Survey: Free for new installations

What we fit in Wellingborough

Opening repairs. Damaged jambs and heads repaired or new framing fitted.
Ongoing servicing. We can service the new door from the start so its history begins on day one.
Commissioning. Each new door is tested and handed over with the documents it needs.
Safe strip-out. Springs unwound and the old door dismantled safely.
Disposal. Old doors taken away for recycling or disposal.

Typical scopes of work

Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Changing a manual sliding door for a new electric sectional door running on low-headroom tracks.
Removing a rotted timber frame and fitting new steel jambs before installing a replacement roller shutter.

Powered door rules that apply in Wellingborough

Wellingborough is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

Most installations in Wellingborough can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Guide prices for industrial door replacement

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Do you replace doors at multiple sites across Northamptonshire?

Yes. We replace doors across Northamptonshire, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.

How long will our opening in Wellingborough be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

How much does industrial door replacement cost in Wellingborough?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Wellingborough.

Industrial door replacement near Wellingborough

Besides Wellingborough, we can survey and quote for sites in Rushden, Kettering, Northampton and the rest of Northamptonshire.

Other services in Wellingborough

More about Industrial door replacement · industrial doors in Wellingborough. Last updated 19 October 2026.