In short
Replacing a door at a unit in Bicester (OX26) is a chance to upgrade: insulated instead of single skin, electric instead of manual, or high-speed where the opening is busy.
- Town
- Bicester
- Postcode district
- OX26
- Area
- Oxfordshire
- Survey
- Free for new installations
What to specify
- Right door type. Like-for-like or an upgrade to suit how the opening is used now.
- Free survey. Existing door, opening and space assessed free of charge.
- Opening repairs. Damaged jambs and heads repaired or new framing fitted.
- Ongoing servicing. We can service the new door from the start so its history begins on day one.
- Safe strip-out. Springs unwound and the old door dismantled safely.
Jobs we can carry out
- Phasing the replacement of several loading doors so only one bay is out of use at a time.
- Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
- Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Powered door rules that apply in Bicester
Bicester is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
How the work is organised
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Strip-out and disposal on replacement | £345 – £1,195 per door |
| Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m) | £2,395 – £5,495 |
| Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m) | £3,495 – £8,495 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Bicester
How long will our opening in Bicester be out of use?
The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.
Do you replace doors at multiple sites across Oxfordshire?
Yes. We replace doors across Oxfordshire, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.
Should we repair or replace our door in Bicester?
If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.
Industrial door replacement near Bicester
Our teams cover Bicester (OX26) and nearby Oxford, Banbury, Aylesbury, along with the rest of Oxfordshire.
- Industrial door replacement in Oxford
- Industrial door replacement in Banbury
- Industrial door replacement in Aylesbury
- Industrial door replacement in Witney
- Industrial door replacement in Abingdon
- Industrial door replacement in Bletchley
Other services in Bicester
- Hangar and large-span doors
- Door automation and controls
- Impact traffic doors
- High-speed doors
- Cold store and freezer doors
- Bollards and door protection
- Steel personnel and fire exit doors
- Door safety upgrades
More about Industrial door replacement · industrial doors in Bicester. Last updated 19 October 2026.