Industrial door replacement in Didcot

In short

Old springs, corroded guides and obsolete motors make some doors in Didcot hard to keep running. A planned replacement avoids the next breakdown and leaves you with a door that suits how you work now.

Town: Didcot
Postcode district: OX11
Area: Oxfordshire
Survey: Free for new installations

What to specify

Safe strip-out. Springs unwound and the old door dismantled safely.
Right door type. Replace with the same type or move to a door that suits your current needs.
Free survey. Existing door, opening and space assessed free of charge.
Disposal. Old doors taken away for recycling or disposal.
Minimal downtime. The new door is ready before the old one comes out, keeping downtime short.

Jobs we can carry out

Phasing the replacement of several loading doors so only one bay is out of use at a time.
Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Swapping a standard shutter for a security-rated door installed exactly to the manufacturer's certified specification.

Safety law for industrial doors in England

Industrial doors in Didcot are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Guide prices for industrial door replacement

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Do you replace doors at multiple sites across Oxfordshire?

Yes. We replace doors across Oxfordshire, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.

Is the survey free for door replacement in Didcot?

Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.

How long will our opening in Didcot be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

Industrial door replacement near Didcot

Working in Didcot? We also take on jobs in Abingdon, Oxford, Thatcham and across Oxfordshire.

Other services in Didcot

More about Industrial door replacement · industrial doors in Didcot. Last updated 19 October 2026.