Industrial door replacement in Crieff

At a glance

Industrial door replacement in Crieff: free survey, safe strip-out of the old door, repairs to the opening where needed, and a new door installed, commissioned and handed over with its paperwork.

Town: Crieff
Postcode district: PH7
Area: Perth and Kinross
Survey: Free for new installations

What to specify

Right door type. Replace with the same type or move to a door that suits your current needs.
Disposal. We take the old door away so there is nothing left on site to deal with.
Opening repairs. Any damage to the opening is put right so the new door fixes securely.
Ongoing servicing. We can service the new door from the start so its history begins on day one.
Commissioning. Safety devices tested, forces measured and instructions handed over.

What this work can involve

Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Replacing a corroded single-skin roller shutter on a trade unit with an insulated roller door and electric operation.
Changing a manual sliding door for a new electric sectional door running on low-headroom tracks.

Who is responsible for door safety at a site in Crieff?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Sites in and around Crieff vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Industrial door replacement in Crieff: your questions

How long will our opening in Crieff be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

Should we repair or replace our door in Crieff?

If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.

Do you take the old door away from our Crieff site?

Yes. Strip-out includes removing the old door, springs, guides and drive from site for recycling or disposal. It is priced as a separate line in the quote so you can see exactly what removal costs.

Industrial door replacement near Crieff

Besides Crieff, we can survey and quote for sites in Perth, Alloa, Stirling and the rest of Perth and Kinross.

Other services in Crieff

More about Industrial door replacement · industrial doors in Crieff. Last updated 19 October 2026.