Industrial door replacement in Renfrew

Quick answer

Old springs, corroded guides and obsolete motors make some doors in Renfrew hard to keep running. A planned replacement avoids the next breakdown and leaves you with a door that suits how you work now.

Town: Renfrew
Postcode district: PA4
Area: Renfrewshire and Dunbartonshire
Survey: Free for new installations

Options for industrial door replacement in Renfrew

Commissioning. Each new door is tested and handed over with the documents it needs.
Safe strip-out. Tensioned springs and heavy parts are removed by trained engineers.
Ongoing servicing. We can service the new door from the start so its history begins on day one.
Free survey. We inspect the old door and measure the opening at no cost before quoting.
Opening repairs. Any damage to the opening is put right so the new door fixes securely.

Examples of work we can quote for

Replacing a corroded single-skin roller shutter on a trade unit with an insulated roller door and electric operation.
Phasing the replacement of several loading doors so only one bay is out of use at a time.
Removing a rotted timber frame and fitting new steel jambs before installing a replacement roller shutter.

Who is responsible for door safety at a site in Renfrew?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Budgeting for industrial door replacement in Renfrew

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial door replacement

Is the survey free for door replacement in Renfrew?

Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.

Should we repair or replace our door in Renfrew?

If the door has several faults, recurring problems or parts that are no longer made, replacement is often better value. We price repair and replacement side by side so you can decide on cost and remaining life.

How long will our opening in Renfrew be out of use?

The new door is made to measure before the old one is removed, so a single door is usually stripped out and replaced in a day, with the opening secured again by the end of the visit.

Industrial door replacement near Renfrew

Besides Renfrew, we can survey and quote for sites in Clydebank, Govan, Paisley and the rest of Renfrewshire and Dunbartonshire.

Other services in Renfrew

More about Industrial door replacement · industrial doors in Renfrew. Last updated 19 October 2026.