Industrial door replacement in Barry

Quick answer

Is an old door at your Barry site costing more in repairs than it is worth? We price replacement alongside repair so you can compare, then handle the whole changeover if replacement makes sense.

Town: Barry
Postcode district: CF62
Area: South Glamorgan
Survey: Free for new installations

What to specify

Opening repairs. Damaged jambs and heads repaired or new framing fitted.
Commissioning. Safety devices tested, forces measured and instructions handed over.
Ongoing servicing. We can service the new door from the start so its history begins on day one.
Safe strip-out. Tensioned springs and heavy parts are removed by trained engineers.
Right door type. Replace with the same type or move to a door that suits your current needs.

What this work can involve

Changing a manual sliding door for a new electric sectional door running on low-headroom tracks.
Removing a rotted timber frame and fitting new steel jambs before installing a replacement roller shutter.
Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.

Safety law for industrial doors in Wales

Industrial doors in Barry are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for industrial door replacement in Barry

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Barry

How much does industrial door replacement cost in Barry?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Barry.

Do you replace doors at multiple sites across South Glamorgan?

Yes. We replace doors across South Glamorgan, including planned programmes covering several sites or a whole run of units, phased so that each site keeps operating normally while its doors are being changed.

Can we change door type when replacing at our Barry unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

Industrial door replacement near Barry

Working in Barry? We also take on jobs in Penarth, Cardiff, Caerphilly and across South Glamorgan.

Other services in Barry

More about Industrial door replacement · industrial doors in Barry. Last updated 19 October 2026.