Industrial door replacement in Burgess Hill

In short

Industrial door replacement in Burgess Hill: free survey, safe strip-out of the old door, repairs to the opening where needed, and a new door installed, commissioned and handed over with its paperwork.

Town: Burgess Hill
Postcode district: RH15
Area: West Sussex
Survey: Free for new installations

What to specify

Ongoing servicing. We can service the new door from the start so its history begins on day one.
Disposal. We take the old door away so there is nothing left on site to deal with.
Commissioning. Safety devices tested, forces measured and instructions handed over.
Right door type. Replace with the same type or move to a door that suits your current needs.
Free survey. We inspect the old door and measure the opening at no cost before quoting.

What this work can involve

Replacing vehicle-damaged roller shutters on a block of small industrial units between tenancies.
Stripping out a sectional door with broken springs and an obsolete motor, and fitting a new door with an inverter drive.
Removing a rotted timber frame and fitting new steel jambs before installing a replacement roller shutter.

Safety law for industrial doors in England

Industrial doors in Burgess Hill are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Sites in and around Burgess Hill vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Guide prices for industrial door replacement

Industrial door replacement guide prices
Item	Guide price (ex VAT)
Strip-out and disposal on replacement	£345 – £1,195 per door
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Burgess Hill

How much does industrial door replacement cost in Burgess Hill?

Strip-out and disposal has a guide price of £345 to £1,195 ex VAT per door, plus the new door, for example £2,395 to £5,495 for an electric single-skin roller shutter. We confirm the full fixed price in writing after a free survey in Burgess Hill.

Can we change door type when replacing at our Burgess Hill unit?

Usually, yes, subject to headroom, side room and back room. Common upgrades are single-skin to insulated, manual to electric and conventional to high-speed. We check the space and the structure on survey before recommending a door type.

Is the survey free for door replacement in Burgess Hill?

Yes. Surveys for replacements are free. We assess the old door and opening, measure for the new door, and quote a fixed price that lists the door, strip-out, disposal and any opening works separately.

Industrial door replacement near Burgess Hill

Besides Burgess Hill, we can survey and quote for sites in Haywards Heath, Hove, Brighton and the rest of West Sussex.

Other services in Burgess Hill

More about Industrial door replacement · industrial doors in Burgess Hill. Last updated 19 October 2026.