The short version
Replacing an ageing fire shutter in Newton Aycliffe? We check the wall still suits the new shutter's tested specification, fit it with fire-stopping as detailed and prove it closes on alarm before we leave.
- Town
- Newton Aycliffe
- Postcode district
- DL5
- Area
- County Durham
- Survey
- Free for new installations
Options that matter on site
- Daily-use models. Where needed, the shutter can be motorised for daily traffic and still close on alarm.
- Tested products. Shutters supplied with the manufacturer's fire test evidence and Declaration of Performance.
- Fail-safe closing. Controlled descent on alarm or power loss, with governor speed control.
- Alarm interface. We agree the cause-and-effect with your alarm contractor and prove the release at commissioning.
- Warning devices. Sounders and beacons to warn people before and during descent.
Typical scopes of work
- Fitting a 120-minute fire shutter to a conveyor opening between production and storage compartments, released by the fire alarm.
- Replacing an obsolete kitchen servery fire shutter with a new shutter released by the fire alarm panel.
- Fire-stopping the head and jambs of a replacement shutter exactly to the manufacturer's installation details.
Fire shutter law in England
A fire shutter only does its job if it closes when needed. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must keep fire safety equipment maintained in efficient working order, and keeping test records is the usual way to show it. Shutters must also stay as the manufacturer tested and certified them, so repairs should use the right parts. In Newton Aycliffe, the enforcing authority is the local fire and rescue authority.
Planning the work around your site
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Fire shutter, single, with control panel and fail-safe closing | £4,495 – £11,995 |
| Fire shutter service with drop test, per shutter | £125 – £265 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Newton Aycliffe
Do you service fire shutters across County Durham?
Yes. We service and drop-test fire shutters across County Durham, including most makes we did not install, and provide a written report for each shutter. Servicing visits are chargeable at a fixed price per shutter.
How much does a fire shutter cost in Newton Aycliffe?
Our guide price for a single fire shutter with control panel and fail-safe closing is £4,495 to £11,995 ex VAT, supplied and fitted. Size, rating and alarm interface set the final figure, which we confirm in writing after a free survey in Newton Aycliffe.
Can you link a fire shutter to our existing alarm in Newton Aycliffe?
Usually, yes. We work with your fire alarm contractor to agree the cause-and-effect and the interface, designed to BS 7273-4, and prove the shutter closes on the alarm signal at commissioning.
Fire shutters near Newton Aycliffe
Newton Aycliffe is in the DL5 postcode district in County Durham. We also cover Bishop Auckland, Darlington, Stockton-on-Tees.
- Fire shutters in Bishop Auckland
- Fire shutters in Darlington
- Fire shutters in Stockton-on-Tees
- Fire shutters in Durham
- Fire shutters in Billingham
- Fire shutters in Thornaby-on-Tees
Other services in Newton Aycliffe
- Industrial door motor replacement
- Impact traffic doors
- Sliding and folding industrial doors
- PVC strip curtains
- Industrial door replacement
- Steel personnel and fire exit doors
- Industrial door installation
- Planned maintenance contracts
More about Fire shutters · industrial doors in Newton Aycliffe. Last updated 19 October 2026.
